The output is activated as soon as the button is pressed, and will continue to operate for a preset time. The siren will chirp a number of times, indicating the violated zone.Īuxiliary Output 1 is activated at any time by pressing OPTION 1 on the remote transmitter. If the siren chirps 4 times, the alarm was triggered. Upon returning to the vehicle, press DISARM.Trip ID identifies the specific zone that triggered the alarm system.If the Trunk Release / Auxiliary Output is set to Button 1, pressing and holding Button 2 will activate the Door Unlock Output for as long as the button is held (up to 45 seconds). If the Trunk Release / Auxiliary Output is set to Button 2, pressing and holding Button 1 will activate the Door Lock Output for as long as the button is held (up to 45 seconds).The Door Unlock Output is activated when the vehicle ignition is turned off (this option can be turned off).The Door Lock Output is activated when all doors are closed and the vehicle ignition is turned on (this option can be turned off).The Door Lock / Unlock Outputs are activated when the alarm is armed and disarmed.The Trunk Release / Auxiliary Output is activated by pressing and holding DISARM or ARM (selectable) on the remote transmitter The output duration lasts as long as the button is held (up to 45 seconds). The Illuminated Entry Output is activated for 60 seconds after the alarm is disarmed. Exit Valet by pressing any button on the remote transmitter with the vehicle ignition off.In Valet Mode, the LED will flash once every 1/2-second when the vehicle ignition is off.In Valet Mode, the LED will double-flash when the vehicle ignition is on.Valet Mode prevents the alarm from arming automatically, and prevents automatic immobilization Enter Valet Mode by pressing the DISARM button on the remote transmitter with the vehicle ignition on.If the Automatic Arming option is not enabled, the alarm will automatically disable the vehicle starter 20 seconds after the ignition is turned off and a door is opened, or 2 minutes after the alarm is disarmed and not re-armed. If the Automatic Arming option is enabled, the alarm will automatically arm and disable the vehicle starter 20 seconds after the ignition is turned off and the last door is closed, or 2 minutes after the alarm is disarmed and not manually re-armed Automatic Immobilization 4 Full-trigger trips within one arming period will cause the alarm to ignore any further full-trigger inputs until it is disarmed then rearmed.10 Lite-touch trips within one arming period will cause the alarm to ignore any further lite-touch inputs until it is disarmed, then rearmed.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |